Digital logic lab

Digital logic lab equipped with a main unit and 13 experiment modules. Each module permits to realize several practical works. Supplied with leads and user’s manual.

13 EXPERIMENT MODULES.
Designed with a 215 x 165 x 30mm solid body plastic housing, with electrical wiring printed on the front panel. An 8-bit DIP switch, located on the right top corner allows the user to simulate faults. Solution for faults are listed in the experiment manual for user's reference. Comprehensive experiment and instructor's manual are supplied with modules and contains theoretical drawings, wiring drawings. The experiment part has input signals, location of test points, tables to be filled up, comments and exercises.

Configure your product
Select a reference

Type

Selected reference PSY3101

Quantity

Download (DIGITAL.pdf)

Download (DIGITAL_en.pdf)

Selected reference PSY3101

Choose one reference

PSY3101 MAIN UNIT WITH:
4 fixed DC supplies with output overload protection: +5V -5V +12V -12V / 300mA on each output.
1 adjustable DC power supply with output overload protection: from 1.5 to 15V / 500mA
3 fixed frequencies: 1Hz, 50Hz, 1MHz 0.01%, fanout : 10 TTL load
1 variable signal generator. 6 ranges from 1Hz to 1MHz - Fanout: 10 TTL or CMOS load.
2 x 8 outputs, edge 0 1 TTL level
4 outputs: edge 0 1 TTL or CMOS
1 fixed AC output - 6Vrms with overload protection
Thumbwheel switch, 2 digit, BCD code output, common point input.
16 x LED indicating high and low logic state
4 sets of independent 7-segment LED display, with BCD.
3 x LED functioning as a logic probe.
1 speaker with driver circuit.
Dimensions : 400 x 300 x 130 mm. Weight : 5.8kg