Photovoltaic kit for energy injection

EDUCATIONAL OBJECTIVES
• Understand a photovoltaic installation of the energy restitution type on the network.
• Study the types of energy restitution to the network (total or partial).
• Apprehend and understand the photovoltaic elements present.
• Apprehend and understand the security elements present.
• Wire a photovoltaic installation with network restitution.
• Carry out the wiring of a photovoltaic / wind turbine installation.
• Carry out the electrical measurements of the different values.
• Study the efficiency and the incidences related to the positioning of the solar panels.
• Study the use of a network inverter and energy meter.

Skonfiguruj produkt
Wybierz referencję

Wybrane referencję KX-EDU

Ilość

Pobierz (KX-EDU.pdf)

Pobierz (KX-EDU_en.pdf)

Reference sélectionnée KX-EDU

Composition of the kit
• 1 DC photovoltaic switch
• 1 AC switch
• 1 surge protector
• 1 photovoltaic circuit breaker
• 1 750W network inverter. Automatic synchronization on the 230VAC-50Hz network. Input voltage from 50 to 250VDC. Thermal protection integrated into the housing.
• 3 single-phase 80A modular energy meters. Measurement and visualization of total and partial energy. 10Wh resolution.
• 1 voltage control relay.
• 1 undervoltage coil
• 1 Disconnect switch
• 2 30mA/10A bipolar RCDs.
• 1 500mA bipolar service circuit breaker,
• 1 2P+T male plug.
• 1 230V 2P+T modular power socket
• 1 set of 4-6mm² connection terminals.
• 1 set of 4-6mm² photovoltaic connectors.
• 1 set of key for MC4 connector
• 1 sheet of 10 photovoltaic labels indicating the different safety manipulations.
• 1 folder on USB key: detailed instructions for each component, wiring diagram and practical work.
Works with panels with specifications between 50 and 250VDC.