Distribution with supervision

Characteristics common to the 2 boxes
• A programmable controller internal to the boxes, 2 motorized magnetothermal circuit breakers and 1 supervision software (VijeoDesigner®) make the box communicating via a TCPiP Ethernet network.
• 1 General disconnector
• 1 set of connection terminals for the arrival of the main source and the departure of sources 1 and 2.
• 1 RJ45 base for the connection to a computer network.
• 1 set of indicator lights and a light column indicate the status of the departures, the voltage presence of each electrical source.
• A Manu/Auto switch allows you to choose the operating mode of the cabinet:
- Manu position: the user controls each source output using the push buttons on the front of the cabinet.
- Auto position: the user controls each source output using the supervision software.
• 3 cable glands for passing the 3 cables into the cabinet

ILO/MONO characteristics:
• single-phase main voltage source 230V-AC + Earth
• independent single-phase distribution source outputs 1 and 2 230V-AC.
• 2 motorized single-phase magnetothermal circuit breakers. 2P-32A/C rating.

ILO/TRI characteristics
• three-phase main voltage source 3 x 400V-AC + Neutral + Earth
• independent three-phase distribution source outputs 1 and 2 3 x 400V-AC + Neutral.
• 2 motorized four-pole magnetothermal circuit breakers. 4P-32A/C rating.

Supplied fully wired, with PLC and supervision programs as well as computer cables for programming. Can be connected to our ARM-TGBT-COM. Can be placed on a table or, thanks to the 2 brackets provided, directly fixed to a wall.
Supplied without electrical cables.
Dimensions: 830 x 400 x 300mm Overall, including headlight..