Back to the list

Studying the conversion of renewable energy

Study of the conversion of the electrical energy from 3-phase to single-phase. Make some measurements with a clamp-on ammeter.
These converters operate on the same principle as an industrial model.
They treat the electrical power supplied by a wind turbine.
The output cannot be synchronized with the network
but can be used in isolated site.

Educational objectives
• Study of the conversion of the electrical energy from 3-phase to single-phase.
• Make some measurements with a clamp-on ammeter.

Type
Selected reference CHARGEOL
Quantity

Selected reference CHARGEOL
Choose one reference

Technical characteristics
• The converter's synoptic, printed on the front, facilitates location of the components and measurement points.
• The three-phase voltage from the wind turbine is applied to CONVERTYS or CHARGEOL through 4 safety terminals 4mm dia. The wind turbine-to-converter interconnection is made using laboratory leads.
    CONVERTYS :  Inputs between 375 and 460V three-phase.
    CHARGEOL : Inputs between 80 and 120V three-phase.
• A main switch located on the top of the box, starts and stops the converter's power supply.
• Safety terminals 4mm diam. located between each component enable the voltages and currents to be measured at each conversion step.
• A thermal-magnetic circuit-breaker protects the transformer primary against any overload.
• Output converter 300W/230V.
• A differential circuit-breaker 30mA protects the output to the use network cabled according to neutral system TT.
• Unit on casters dimensions: 600 x 450mm. Height 530mm

  • icon-devis

    Free
    quotation

  • icon-temps

    Answer
    under 48H00

  • icon-livraison

    Delivery
    worldwide

  • icon-medal

    2 years warranty
    for all our products

  • icon-service

    Export service
    available

Do you need help ?

You can't find a product,

You want technical informations,

You want to talk with us

Contact us
Find out all the useful contacts
Where to find us ?