Kit for the study of a Schneider ® M221 controller

Composition
• 1 Schneider® M221 PLC. Ethernet. 14 inputs and 10 all-or-nothing outputs. Supplied with Eco struxure Machine Expert basic software
• 1 TM3 module expansion card for M221 PLC with 2 analog inputs
• 1 TM2 module expansion card for M221 PLC with 2 analog outputs
• 1 Schneider ® HMI color screen of 3.7’’. Supplied with Vijéo Designer supervision software.
• 1 24VDC power supply.
• 4 surface-mounted boxes with 3 locations for control or indicator light with a drilling diameter of 22.5mm
• 1 surface-mounted box with 1 location for control or indicator light with a drilling diameter of 22.5mm
• 6 24Vdc indicator lights (2 red, 2 white, 2 green)
• 1 key switch with return with a normally open contact
• 1 2-position switch with two normally open contacts
• 2 black push buttons each with a normally open contact
• 1 red push button with a normally closed contact
• 1 “on/off” push button with a normally closed contact and a normally open contact
• 1 emergency stop “mushroom” button and its label with two normally closed contacts
• 1 3-meter RJ45 cord
• 2 2P C curve circuit breakers
• 1 230V porthole with variable lamp
• 1 4-20mA analog-controlled dimmer, controlling a 230Vac variable lamp
• 1 box allowing the creation of a 0-10V analog signal controlled by potentiometer
• 1 USB / Mini USB cord for programming the PLC
• 1 set of cable glands