Kit for the study of a Siemens ® S7-1200 PLC

EDUCATIONAL OBJECTIVES
• Study the connection diagram of the inputs and outputs of a PLC.
• Study the configuration of an Ethernet type computer network.
• Study the programming of a PLC in contact language or Grafcet
• Study the programming of an HMI (Human Machine Interface).
• Study the programming of a PLC with all or nothing inputs / outputs

Configure your product
Select a reference

Selected reference KI-AP2

Quantity

Download (KI-AP2.pdf)

Download (KI-AP2_en.pdf)

Selected reference KI-AP2

Composition
• 1 Siemens® S7-1200 PLC. Ethernet 14I/10S TOR with 2I 0-10V – Power supply in 230VAC
• 1 Siemens 5.7-inch color HMI touch screen
• 1 24VDC power supply for PLC inputs/outputs
• 4 surface-mounted boxes with 3 slots for control or indicator light drilling diameter 22.5mm
• 1 surface-mounted box with 1 location for control or indicator with drilling diameter 22.5mm
• 6 24VDC indicator lights (2 red, 2 white, 2 green)
• 1 key switch with return, equipped with a normally open contact
• 1 2-position switch with two normally open contacts
• 2 black push buttons each with a normally open contact
• 1 red push button with a normally closed contact
• 1 ''on/off'' push button with a normally closed contact normally closed and a normally open contact
• 1 emergency stop “punch” button and its label with two normally closed contacts
• 2 RJ45 cords of 3 meters
• 1 circuit breaker curve C 2P
• 1 set of cable glands