Mobile resistive load

The high quality of loads depends directly of the quality of switches used. All of our loads use ultra fast breaker switches, capable of breaking a DC current with an inductive load, for example the current generated by a 3kW dynamo. The resistive elements consist of a wire coil wound onto a ceramic core and have a good life because they are coating against the oxydation. The input terminals are double insulated and accept equally Ø4mm standard or safety leads.

Skonfiguruj produkt
Wybierz referencję

Energia

Wybrane referencję RH20

Ilość

Pobierz (RH.pdf)

Pobierz (RH_en.pdf)

Reference sélectionnée RH20

Wybierz referencję

Operating mode
• The selection of the operating mode is by 4 insulated input switches
   DC mode or 240V single-phase.
   3-phase star 400V.
   3-phase delta 240V.
   (Exists also for voltages 127/230V in 4kW upon request)

Variation
• 6 switches (7 on RH40S model) with the gradation 5%, 10%, 15%, 20%, 25%, 25%
l allow a continual progression without a break of the load from 0 to 100% in steps
l of 5% (2.5% on the RH40S).
• All of the intermidiate values are obtained by turning 1 or 2 switches which can be made
simultaneously using 2 hands.

Wheeled units
• Robust construction with furnace baked epoxy paintwork. Excess heat is vented by natural convection through a grid which prevents contact with any voltages.
• Dimensions: 660 x 400 x 880mm
• Male earth socket in standard. Female earth socket upon request.
• CEI1010 CATIII 1000Vrms pol2