Mobile resistive load
The high quality of loads depends directly of the quality of switches used. All of our loads use ultra fast breaker switches, capable of breaking a DC current with an inductive load, for example the current generated by a 3kW dynamo. The resistive elements consist of a wire coil wound onto a ceramic core and have a good life because they are coating against the oxydation. The input terminals are double insulated and accept equally Ø4mm standard or safety leads.
Operating mode
• The selection of the operating mode is by 4 insulated input switches
DC mode or 240V single-phase.
3-phase star 400V.
3-phase delta 240V.
(Exists also for voltages 127/230V in 4kW upon request)
Variation
• 6 switches (7 on RH40S model) with the gradation 5%, 10%, 15%, 20%, 25%, 25%
l allow a continual progression without a break of the load from 0 to 100% in steps
l of 5% (2.5% on the RH40S).
• All of the intermidiate values are obtained by turning 1 or 2 switches which can be made
simultaneously using 2 hands.
Wheeled units
• Robust construction with furnace baked epoxy paintwork. Excess heat is vented by natural convection through a grid which prevents contact with any voltages.
• Dimensions: 660 x 400 x 880mm
• Male earth socket in standard. Female earth socket upon request.
• CEI1010 CATIII 1000Vrms pol2
-
Free
quotation -
Answer
under 48H00 -
Delivery
worldwide -
2 years warranty
for all our products -
Export service
available
Do you need help ?
You can't find a product,
You want technical informations,
You want to talk with us
Contact us