Study of the programming PLC and HMI
Set of modules. The modules are cabled using safety leads. Supplied with teaching ressources. Available with Siemens® or Schneider® components.
Educational objectives
• Study of a complete diagram with automation sensors and components for connecting to the inputs/outputs of a PLC.
• Study the configuration of an Ethernet for computers.
• Study the programming of a PLC in contact language.
• Study the programming of an HMI (Human Machine Interface).
• Study an analogue signal by current and voltage.
• Configure a WiFi network and control components from a tablet (QUICK-ECPLUS only)
Comprises
QUICK-DPLUS version : SIEMENS®
• 1 Siemens® PLC module SIMATEC S7-1200 Ethernet 14I/10O binary with 1 input and 1 output 4-20mA.Optional LOG-STEP programming software.
• 1 Siemens HMI module Simatic KTP600 Ethernet 5.7". Optional LOG-STEP programming software.
QUICK-ECPLUS version : SCHNEIDER®
• 1 Schneider® PLC module M221 Ethernet 14I/10O binary with 1 analog expansion card,
0-10V and 1 input PT100. Supplied with SoMachine Basic programming software.
• 1 Schneider HMI module HMISTU Ethernet 3.7" colour.
Supplied with VijeoDesigner programming software.
• 1 configured WiFi router (local WiFi specific to the system). Control via the VijeoDesigner application.
Common modules
• 1 Emergency stop module.
• 1 Distribution module of 230VAC on 4mm terminals with RC circuit-breaker 30mA-16A.
• 1 Power supply module 230V AC - 24V DC - 2A.
• 1 Pushbutton and switch module.
• 1 Module with limit switch and PT100 temperature sensor.
• 1 Signal generator module 0-10V and 0-200mV.
• 1 Light sensor module.
• 1 Wind sensor module.
• 1 Voltage dimmer module 230V AC with analogue input 4-20mA.
• 1 Module with 2 auxiliary contactors 24V DC.
• 1 Indicator light module 24V DC.
• 3 Bulkhead light modules 230V AC, 40W.
• 1 Set of safety leads for carrying out the different practical works.
You may also be interested in these products
Set of modules. The modules are cabled using safety leads. Supplied with teaching ressources. Available with Siemens® or Schneider® components.
Educational objectives
• Study of a complete diagram with automation sensors and components for connecting to the inputs/outputs of a PLC.
• Study the configuration of an Ethernet for computers.
• Study the programming of a PLC in contact language.
• Study the programming of an HMI (Human Machine Interface).
• Study an analogue signal by current and voltage.
• Configure a WiFi network and control components from a tablet (QUICK-ECPLUS only)
-
Free
quotation -
Answer
under 48H00 -
Delivery
worldwide -
2 years warranty
for all our products -
Export service
available
Do you need help ?
You can't find a product,
You want technical informations,
You want to talk with us
Contact us