Back to the list
Motor start-up studies
  • Motor start-up studies
  • Motor start-up studies

Motor start-up studies

System for studying the start-up of asynchronous motors. For this completely stand-alone system, all you have to do is connect it to a 3-phase 400V mains socket. Selection of the required motor start-up type via push-buttons at the front of the electrical cabinet.

Proposed Practical Works
• Studying of the functioning star/delta starting, direct, by frequency converter, by soft starter
• Statement of engine characteristics, taking measurement of U and I
• Study of current transformers
• Modification of the acceleration and deceleration ramp of the frequency converter
• Setting the PC connection – PLC

Selected reference DEMARAC
Quantity

Selected reference DEMARAC
Selected reference DEMARAC

A 300W asynchronous motor, a powder brake and a tachometer generator are fixed directly onto the base with wheels. The power unit and the electrical cabinet are linked together using 4mm safety leads so that measurements can be taken using a hook-on ammeter or voltmeter, etc.
A key-operated switch at the front makes it possible to use the electrical cabinet when it is switched on with the door open. In this way, a qualified individual may take electrical measurements inside the cabinet.
A multifunction measuring unit displays the electrical quantities on the front door.
A digital tachometer shows the motor rotation speed.
A potentiometer at the front is used for varying the motor load.

Features
• Three-phase 400V supply voltage.
• Protected by residual current device, circuit breakers and fuses.
• Set of lamps and push-buttons for viewing and controlling the required type of start-up.
• Multifunction measuring unit with digital display, which is wired at the start of the circuit measuring the phase-to-ground and composite voltages, the line currents, the active, reactive and apparent power, in total, the power factor, the THD (total harmonic distortion)
• Digital display showing the motor’s rotation speed
• Starter/Decelerator Schneider®. All of the settings are adjusted using potentiometers on the front of the device (acceleration time, deceleration time and torque, etc.)
Acceleration time: from 1.1 to 5 seconds
Deceleration time: from 0 to 5 seconds
Torque adjustment: from 20% to 65% of the breakaway torque of the direct motor
• Frequency converter Schneider® (ATV31 type). Possible adjustments:
- Acceleration ramp
- Quick stop/free wheel
- Pre-selected speeds...
• 2 potentiometers at the front of the cabinet adjust the motor’s rotation speed and the motor's load.
• Contactor/circuit breaker, wired upstream of the motor, protect against overloads and short-circuits. A display built into the unit indicates the current consumed by the motor and the thermal protection threshold.
• 300W 400V/690V – 1/0.75A asynchronous motor 1500rpm.
• 300W powder brake. 0-10V power supply
• 20V for 1000rpm tachometer generator

Dimensions:
Base with wheels: 750 x 670mm
Total height: 1970mm - Weight: 118kg

You may also be interested in these products

  • icon-devis

    Free
    quotation

  • icon-temps

    Answer
    under 48H00

  • icon-livraison

    Delivery
    worldwide

  • icon-medal

    2 years warranty
    for all our products

  • icon-service

    Export service
    available

Do you need help ?

You can't find a product,

You want technical informations,

You want to talk with us

Contact us
Find out all the useful contacts
Where to find us ?